gallon tank for high volume use. Oversized wheels move smoothly across
uneven surfaces. Funnel collects fluids from both drain plug and filter
port. Polyethylene tank with used-filter tray, tool holders and sight gauge.
Removable screen prevents debris from entering the tank.
The Black Knight:Numbers
as fluid level lowers, indicating how
are left until the tank is
BEST Tank Gauge We've Ever Seen Available!
Works in any
tank up to 99 inches deep!
IMAGE FOR OTHER GAUGE TYPES
99" to 0"
Large number display
Molded housing- Non-corrosive,
Nickel plated brass
Oversized float with swivel assembly
High or Low Level Tank Alarm
Sentry #7670 Tank Alarm System
monitors fluid level in tank, warns with 103 decibel siren, unit is battery
operated and upgradeable to optional 12v transformer. Unit has 2 inch
tank fitting. (Can not be used to
for 2.0% Additional Discount, Pay by Check
E10 Features Include...
Stage Front Arms provide greater arm
sweep and access to
more vehicle pick-up points.
design, allows "Asymmetric" or "Symmetric" lifting of
screw pads" adjust to multiple heights minimizing the
need for height adapters.
adapter pads minimize stress to vehicles with delicate undercoating.
overhead shut-off system prevents vehicle
mechanical lock release.
rubber door guards protect vehicle from door
damage when using symmetrically.
arm restraints and arm pins inhibit rust and provide
long lasting durability.
Challenger SA10 Two
3-stage front arms provide greater overall arm sweep.
Padded overhead shut off system prevents
vehicle damage from being raised too high.
Double Telescoping Screw Pads adjust to multiple
heights minimizing the need for adapters.
Premium powder coat finish provides
long lasting durable finish.
FOR LOWER CEILINGS AND NARROWER BAYS!
Adjustable heights between 11΄ 4-1/4" and 11΄ 10-1/2" and adjustable widths from 10΄ 9" to 11΄ 5-1/2" provides versatility
at time of installation for buildings with special ceiling or bay width constraints.
with optional 2-Foot Extended height)
Rubber door guards provide added security
against vehicle door damage.
Single-point mechanical lock release system allows technician to disengage both columns simultaneously.
Mirrored "S" shaped columns provides a clear and
safe concave conduit for the
carriage slider blocks.
Pay by Check, receive a
630-678-9010 & Mail Check to address at this
Even A Better Price...
TWO SA10 Lifts...
$33.00 OFF Each Lift...
Per Lift Delivered!
SA10 Lifts $6400.00
us for 2.0% Additional Discount, Pay by Check LINK)
for Home Garage use
Perfect for servicing light-duty trucks and cars
Portable motor cart serves as tow handle to easily move lift from bay to bay
Adjustable arm assemblies
Safety lock bar with multiple lock positions
Fast and efficient operation
Truck adapters included free of charge
BendPak page for other parking lift choices LINK
Wedge Anchor Bolts 3/4 X 5-1/2 Length
Column Leveling Shims, 1/4, 1/8, 1/16
Wide Spotting Dish with 2 Anchors
separately would cost over $145.00)
Wedge Anchor Bolts 5/8 X 5-1/2 Length
Column Leveling Shims, 1/4, 1/8, 1/16
2% discount, if you pay by check, Call 630-678-9010
The HDS-14 is a full-length four-post runway style lift
designed for professional use.
pound lifting capacity
In. Long Runways
include rail kit for optional accessories. Single
hydraulic cylinder mounted underneath runway. Fully
enclosed lifting cables, safety locks, and sheaves.
blocks in each column.
5-Year Manufacturers Limited Warranty!
complete info on the BendPak Page.
are an "Authorized
BendPak Platinum Distributor"
Lifts, Air Compressors &
Air piping, Reels and Pumps.
Installation In the
"ChicagoLand" service area, within 100 milesof
Are Average Costs to assemble the lift kits, depending on style of lift being assembled and having Customer
receive lift kit before our arrival. Hauling of lift kit from our warehouse
to the installation site adds more to the cost. Some lift kits do cost less to assemble, while others cost
more. You must also have to take in to consideration the concrete condition, floor levelness
and other possible variables, such as in-floor heat, sewer and electric piping
location. All these change the cost of the installation and we are NOT
responsible for damage to "In-Floor" heating systems. The
floor should be close to being level or extra shimming costs will be added to
the installation fee if the kit can even be installed in that spot in your
630-678-9010 for a solid estimate based upon your particular installation circumstances.
We are not responsible for inadequate information being given to us for your
Multiple Installation & Future Installation Agreement Discounts
Will Save You $$$
Hook-Up Is Not Included with these prices, Hydraulic Oil Is Included with
delivery from our warehouse to
location for "Installation" if the Lift Kit was NOT purchased from Smitty's
If we assemble & install a used lift you have, we are not responsible for any parts you
may be missing from your lift kit. Make sure you have all the parts!
Post $5200.00 - Two-Post $6200.00
& Aft ... Call
1/2 TON TRANSMISSION
Image To Go To Jacks Page
AIR - HYDRAULIC DESIGN
Hi-Rise Transmission Jack 1/2 Ton (1,000-lb) capacity
630-678-9010 To Order
#1 choice of the professional automotive transmission
repair shops. The HTJ-1000 has proven to be a leader by
contributing years of trouble-free service and
unsurpassed quality. The unique two-stage design has
been an asset to many technicians allowing them complete
control of the jack during installation and removal of
transmissions. Used exclusively by some of the largest
transmission repair facilities, Gray's model HTJ-1000
will definitely become the most popular transmission
jack used in your shop!
25 watt fluorescent
light illuminates the entire engine
Lite with a 25' cord
Lite with a 50' cord Model: 1225-5001 $180.00
to a 150 watt light bulb, this 25
watt fluorescent lamp produces 2,125
lumens of light! It is rated at 20,000
life hours and is cool operating.
On-off switch is protected
from dirt and grease under the domed
The Polycarbonate outer tube
is virtually unbreakable.
& dust tight clamps
prevent dirt and moisture from
entering the light fixture.
directs light down to the work
All cords are SJTOW - oil
resistant, and water tight.
120v cold weather rated
ballast is located inside the
light fixture, not on the cord.
Versatile hanging hooks make
this light great for lighting the
interior or exterior of a
great as a very bright work light
under a vehicle while up in the air
on an your auto lift too!
The Adjustable hanger allows
the light to be used under hoods up
to a whopping 94 inches wide!
An impact ring inside the
protective outer tube prevents the lamp
from flexing and breaking.
Adjustable down to 45"
wide, the Adjustable Hood Lite
can fit even the smallest cars.
An optional inline Tool Tap
12" from the light fixture
brings power right to the job!
Great for Contractors and
Industrial applications as well.
Hood Lite 25 watt fluorescent
models available with longer cords and electrical receptacles LINK
Lite, 20 ft. cord, with switch & ballast in head
lamp is a patented rough service, 13 watt fluorescent lamp that is rated
hours and produces the equivalent light to a 75 watt incandescent bulb.
has undergone a process which makes it 10x more impact resistant.
a better choice than the rest...
We offer quality, brand name products
only. We refuse to sell "No Name"
"Low-End" products because we believe the quality of what
a company markets,
illustrates the integrity of their business principles.
That's why you won't find any
second rate imported vehicle lifts, or other cheap foreign made product on this site no matter how much the profit margin may
Be wary of cut-rate lifts & other items that will most likely need future repair
more often. Imported lift parts can be difficult to find,
that sold it in the USA, since many of them are
that have no real substance.
should go terribly wrong?
Don't expect some obscure foreign manufacturer's lawyers or insurance
company to be flying in from China right away
to stand next to you in
Court, if that's were it all ends up when somebody sues...
just won't show, there's little way to force them to stand by their
Emptor - Let the Buyer Beware" is the Golden Rule, so be careful.
Office & Warehouse
Smitty's Equipment Sales, some
solely internet based companies that
neither install equipment nor provide FreeRepair Troubleshooting or warranty service onthe equipment they sell, are often
room" in their Home using only a PO Box for a mailing address
NO real "Brick & Mortar" warehouse or office location.
sell cheaply made imported auto lifts as well as substandard lubrication equipment, low-grade
air-compressors with aluminum pumps instead of cast-iron pumps and various other
products that are unproven, non-certified, scrap.
have absolutely no
control over whether the product they are marketing gets
re-designed by the
Chinese Manufacturer when they're purchasing more of the foreign made products to
sell to unsuspecting Buyers. So if you want to buy the same item you
purchased previously only eight months later, it may have
the same model number, but it also may not be the same actual design you bought
it breaks down and you have to repair it, what then?
Do they even make the
parts for it anymore or has it been re-designed again?
really made the product and how long have they been making them?
all anyone knows they may have been making cloths dryers before deciding to start
cranking out their brand of auto shop equipment.
actually do have a few imported lift models available, their final assembly
is performed in the USA
where the lifts are matched up with a SPX Fenner USA made Power Unit and
the lifts we offer have
Solid Warranties from
the "American Company"
an inferior product with some "Chinese Made Power Unit" you will find being
sold by some other competing companies. Furthermore, repair parts for the
items we offer, will always be
available many years down the road, if and when you ever need them, because the
imported lift models we
choose to provide are designed by well established American Companies and built specifically
own design and standards.
names like "Challenger Lift", "Quality
Lift" & "BendPak Lifts"...
Well known American
have been providing Automotive Shop Equipment Products for many years and decided to provide a
few imported models along with their traditional American Made Models to answer the cost-effective lift requirements some
Customers want as
a result of our current U.S. economy.
"We may not have the absolute lowest
like some other companies may boast about having...
But the quality
& reliability of what we sell,more than justifies
any negotiable difference in
few of our Competitors can boast about."
on our website means "NO HIDDEN FEES" and we mean it!
will get no hidden fees or charges, the price you see is the price you pay
when you purchase an item here that says "Delivered".
Use caution when purchasing from a company that adds
shipping onto the items when you're checking out. A great example for
instance, is that
most Equipment Manufacturers include the shipping at a flat rate percentage, and there
is simply no reason for a merchant not to include any delivery fee right in
the cost of the equipment if it applies. Many
disingenuous companies add on delivery fees after you decide to go ahead with a purchase so they
"exaggerate" the shipping cost and claim it's a legitimate delivery
fee, but it's usually not.
exception to our "Delivered Policy"
BendPak / Ranger does charge an
additional "Rural Area Transportation
Zone" shipping fee depending on the Zip Code of the delivery address
that will only affect the very rural area deliveries.
have no control over BendPak's "RATZ
Fees" but we will pay part
of the fee for you anyway. Here
is the information so you can see for yourself ahead of time.
Area Transportation Zone DIRECT SHIPPING POINT
TO CUSTOMER: "RATZ" Fees that are charged by
BendPak/Ranger are not covered in the "Free
Delivery" links on this
website. Transportation and shipping to these remote and rural locations are non-direct shipping points with higher associated delivery costs.
You can click the link provided and enter your ZIP
code to check if your shipping address is
included on the RATZ fee list. If it is on the list,
the RATZ fee charged by BendPak is 5.0%.
items on our website offer an additional 2% off if purchased by check instead of processing
a credit card. If you are purchasing a BendPak or Ranger product,
and your ZIP CODE is on the RATZ FEE LIST, you can cut your RATZ cost by
saving 2% more by paying by check instead of Credit Card. We
pass the savings on to you, and that can be quite a bit if you plan on
purchasing several lifts or air compressor and multiple items.