View Shopping Cart

Back To Home Page

 

 
 

Challenger Lifts

 

BendPak Lifts

 

Quality Lifts

 

Globe

In-Ground Lifts

 

Fore & Aft 

Truck & Bus

In-Ground Lifts

 

Rotary Lift Accessories

 

Portable Heavy Duty Truck Lift

 

Ranger Wheel Alignment System

 

Branick

Tire Cages, Tire Spreaders, Brake Bleeders & Strut Compressors

 

Vehicle Lift 

Height Adapters &

Replacement

Rubber Pads

 

Power Units

For Lifts &

Power Unit

Repair Parts

 

CHAMPION

Air Compressor

Repair Parts

 

Saylor-Beall

American Made

Air Compressors

 

Lincoln

Lube Equipment

 

Lincoln

Hose Reels

 

Samson

Lube Equipment

 

Samson 

Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Tire Racks, 

Parts Washers,

Storage Lockers, 

Work Benches,

Oily Rag Cans

 

Oil Filter Crushers

& Tank Monitors

 

OIL TANKS &

Tank Gauges

 

Exhaust Pipe Benders

BendPak

 

Waste Oil 

Drains

 

Brake Lathes,

Tire Machines, Wheel Balancers,

& Accessories

 

Work Lights,

Portable Under-Hood Work Light System & Fluorescent Lighting

 

 Air Conditioning Refrigerant &

Engine Coolant Servicing Equipment

 

FLOOR JACKS,

Engine Hoists,

Shop Presses,

Vehicle Dolly, Jack Stands &

Other Equipment

 
 
 

 Official PayPal Seal

 

TERMS &

CONDITIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tire Machines, Wheel Balancers, Brake Lathes,

Tire Inflation Cages and Accessories 

 

 

Brake Lathes LINK

 

Wheel Balancers For Cars & Trucks & BIG TRUCKS! LINK

 

Tire Inflation Cages LINK

 

Heavy-Duty Truck & Bus Tire Super-Duty Tire Machine LINK

 

 

 


NOTE: If you pay by check instead of using a credit card or paying electronically, you can deduct 2.0% credit card processing fee on any purchase on this web page. LINK

 

NOTE! Ranger orders shipping to California may be subject to California sales tax fees.

Customer is responsible for unloading freight items from the delivery truck. "Special delivery requests" must be addressed before ordering and extra costs may be incurred for special delivery options.

"Delivered" on Ranger items means FREE SHIPPING to direct points within 48-contiguous states .

Transportation and shipping to remote and rural locations are non-direct shipping points with higher associated delivery costs not included in the Free Delivery Policy. Allow 7-14 days for Delivery

Rural Area Transportation Zone DIRECT SHIPPING POINT LINK CHECK YOUR ZIP CODE LINK

NOTE TO BUYER: "RATZ" Fees that are charged by BendPak/Ranger are not covered in the "Free Delivery" links on this website. Transportation and shipping to these remote and rural locations are non-direct shipping points with higher associated delivery costs. You can click the link provided above and enter your ZIP code to check if your shipping address is included on the added fee list. If it is on the list, 

the RATZ fee charged by BendPak is 5.0% but we will discount that fee to 3.5 % of the cost. 


Order directly from our website, or by calling

630-678-9010 between 9AM & 5PM (Central-Time) Mon - Fri. 

 


FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE


 

 

 

 

 

"Delivered" means FREE SHIPPING but does not include "Unloading"  

 

 

 Tire Machines 

 

Ranger R745 Machine

  R745

Sale Price

R-745 Economically Priced Tire machine

$1595.00 Delivered 

  

 

Model: R745  
The R745 is a great changer for regular shop use or for shops working on regular OEM wheels for standard automobiles and light trucks.


  • Drive system type: electric / air

  • Motor: 2 Hp / 110 - 220 VAC 

  • Air requirement: 110 - 175 psi 

  • Wheel clamping method: 4 internal / external clamps

  • Table clamping system: dual pneumatic cylinders

  • Bead breaking system: pneumatic blade

  • Power assist towers: optional

  • Tool holder: manual-lock

  • Tower design: rigid / fixed

  • Bead lifting roller: single / left

  • Internal rim clamping capacity: 12" – 21"

  • External rim clamping capacity: 10" – 18"

  • Turntable tire width capacity mount: 5" – 12"

  • Bead breaker tire width capacity demount: 3" – 11" 

  • Maximum tire diameter: 36" 

Description

The Ranger R745 is a rigid tower tire machine designed to handle the needs of heavy volume tire shops. A sturdy body, rigid 45mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the chance of expensive wheels getting damaged.
A super-size turntable provides an internal clamping capacity of 21" and external clamping capacity of 18". With a long list of time-saving features and a powerful pneumatic optional assist helper, you’ll safely mount low-profile performance tires and wheels with little effort.


Ranger R980XR Machine

R-980XR Tire machine

$2240.00 Delivered 

  

 

MODEL: R980XR Tire Changer

The new Ranger R980XR sports the latest design and technology advancements to provide you with the best in-class value and performance. Incredible, state-of-the art tire-changing capabilities can finally be yours. 

  • Drive system: electric

  • Motor: dual voltage 2 Hp / 110 – 220V / 50 – 60 Hz / 1 Ph

  • Air requirement: 140 – 165 psi 

  • Wheel clamping method: 4 Rim-Guard internal / external clamps

  • Table clamping system: dual pneumatic cylinders

  • Bead braking system: dual-setting, pneumatic blade

  • Turntable speed: 8 sec

  • Turntable rotation: 360°

  • Internal rim clamping capacity: 11" – 24" 

  • External rim clamping capacity: 10" – 23" 

  • Turntable tire width mounting capacity: 4-1/2" – 17-1/2" 

  • Bead breaker tire width demounting capacity: 2" – 15" 

  • Maximum tire diameter: 48" 

  • Weight: 768 lbs. 

The R980XR is easy to operate and durable enough to withstand everyday abuse—especially in a busy shop environment. This extremely powerful tire machine accommodates a wide variety wheels, including virtually all OEM configurations, as well as select performance and alloy wheels. The powerful 2-HP energy-efficient electric motor and gear box work systematically at a controlled speed for easy tire removal and installation. Ergonomic controls are sensibly placed to minimize excessive reaching, walking and bending. The result is more jobs completed per day and a large increase in profits. 

Large storage trays provide ample space for weights, tools and accessories.

 

As an added bonus, the reversible direction gives the operator the option to back up in the event of turntable stalling, and the geometric turntable itself is designed for easier bead lubrication and visual inspection of the lower bead. 

Servicing performance wheels and tires has never been this easy.

Massive Wheel Clamping Range
The Ranger R980XR provides an expanded wheel clamping range from 11" up to 22" giving you the ability to work efficiently on a variety of wheel styles and sizes.

Maximum Power And Control At Every Step
The R980XR tire machine has conveniently-placed foot pedals to give operators precise control at all times. The smooth, effortless power delivery of the 2-HP motor provides multi-speed install performance, even on tires with stubborn beads.

Powerful Bead Breaker
Our multi-position sculpted-blade bead breaker loosens even the most stubborn and awkward tires. The stainless steel cylinder bore maintains sealing efficiency and longevity for improved performance and constant power.

 

Ranger tire changers feature the renowned TurboBlast™ bead seating system that blasts a powerful air burst between the tire and rim to help seat stubborn beads fast. A durable, non-marring nylon discharge barrel features a contoured tab that locks securely on the edge of the rim for better control during air discharge between the tire and wheel. A welded-steel, eight-gallon surge tank is larger than competitive models for all the inflation power you need, when you need it.

 

Rim-Guard™ Technology
The Ranger R980XR Tire Changer features an active multi-position Rim-Guard clamping system that handles expensive wheels with the greatest care, so there’s minimal to no damage and an incredible boost to efficiency. Active, multi-position Rim-Guard™ wheel-clamps provide both internal and external clamping with an increased range for greater wheel handling capabilities.

Wheel Protection Package
Every Ranger R980XR comes equipped with the necessary wheel-protection tools to shield wheels during all demounting and mounting procedures. Bead loosener socks, clamp covers and tool-bar covers offer protection against metal-to-metal contact at all stages of wheel service.


Ranger R980NXT Machine

R-980NXT Tire machine

$3370.00 Delivered 

  

 

 

MODEL: R980NXT  Tire Changer

Designed to Perform and Built to Last!
The Ranger R980NXT works on a wide variety of wheels, including virtually all OEM configurations and performance tire and wheel configurations. The R980NXT features the latest in design and wheel service technology and provides the best value and performance in its class. The R980NXT tire changer is easy to operate, rugged, and equipped with a power assist tower to help when mounting low-profile performance tires. The powerful motor and gear box works systematically at a controlled speed for easy tire removal and installation. Ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending resulting in more jobs per day and increased profits. Large, storage trays provide ample space for weights, tools and accessories.

  • Dual-setting bead breaker

  • Rigid fixed tower design

  • Pistol inflation gauge with integrated air dump valve

  • Inflation regulator / limiter

  • Oversize lube / soap bucket storage

  • Inflation restraint device

  • Tool tray / bin storage

  • Water filter

  • Oiler / lubricator

  • Air regulator

  • Breaker bar

  • Includes brush

  • Powerful high-torque motor

  • Large storage trays

  • Traveling drop-center hold down device

  • For standard passenger and light truck service

  • Manual lock tool holder

  • Adjustable turntable clamps

  • Motorcycle turntable clamps optional

  • TurboBlast bead sealing system

  • Drive system type: electric / air

  • Motor: 2 Hp / 110 - 220 VAC / 50 - 60 Hz

  • Air requirement: 140 - 165 psi / 10 - 11 bar

  • Wheel clamping method: 4 internal / external clamps

  • Table clamping system: dual pneumatic cylinders

  • Bead breaking system: pneumatic blade

  • Internal rim clamping capacity: 11" – 24" 

  • External rim clamping capacity: 10" – 23"

  • Turntable width capacity: 4.5" – 17.5" 

  • Bead breaker width capacity: 1" – 14" 

  • Maximum tire diameter: 48" 

  • Weight: 680 lbs. 

Massive Wheel Clamping Range / 10” – 23”
The Ranger R980XAT provides an expanded wheel clamping range giving you the ability to work efficiently on a variety of wheel styles and sizes.

Maximum Power at Every Step
The R980XAT has conveniently-placed foot pedals to give operators precise control at all times. The smooth, effortless, power delivery of the 2 HP motor provides multi-speed install performance, even on tires with stubborn beads.  

Powerful Bead Breaker
A multi-position sculpted-blade bead breaker loosens even the most stubborn and awkward tires. The stainless steel cylinder bore maintains sealing efficiency and longevity resulting in improved performance and constant power.

RimGuard™ Technology

Ranger RimGuard™ technology means expensive wheels are handled with greater care meaning less damage and increased work efficiency. Active, multi-position RimGuard™ wheel-clamps provide both internal and external clamping with an increased range for greater wheel handling capacity. 

Wheel Protection Package
Every Ranger R980XAT comes equipped with the necessary wheel-protection tools to provide critical protection of wheels during all demounting and mounting steps. Bead breaker socks, clamp covers, and tool-bar covers offer protection against metal-to-metal contact at all stages of wheel service.

Traveling Drop-Center Top Mount Helper / Swing-In Bottom Helper Disc 

 A powerful pneumatic drop-center tool dramatically reduces the effort required to change tough-sidewall tires. Workers can concentrate on working safer and more efficiently. Holds run-flat and low-profile sidewalls in the drop-center then follows the bead around as the tire mounts. A “swing-in” bottom disc can be used to re-loosen stubborn bottom beads or provide lift and support for wide or heavy tires.

Manual Swing Arm
The swing arm assembly features a spring assisted, easy-to-adjust horizontal tool head with vertical height adjustment locks.

Pneumatic Wheel Restraint Devise
The R980XAT features a pneumatic wheel restraint device for increased tire inflation and bead seating safety.

High Torque, Power-on-Demand, Geometric Turntable
High and low torque turntable output gives operators power-on-demand control for increased protection of wheels and tires during every mounting and dismounting step. Reversible direction gives operators the ability to back up in the event of turntable stall during stubborn bead installation. The geometric turntable provides for easier bead lubrication and visual inspection of the lower bead when servicing high performance wheels and tires.

Powerful Bead Seating & Inflation
TurboBlast™ bead seating system provides a high-power burst of air to help seal beads.



Visit Ranger's Website for more Tire Machine Models to choose from!

Ranger Motorcycle & ATV Wheel Clamp Kit

Works with any Ranger Tire Machine Above

 

  Clamp Close Up

Versa-Clamp Adapter Kit

Turntable adapters for increased performance and Motorcycle/ATV wheel capability.

  • Set of Four

  • Heavy Steal Construction

  • Increases and Decreases Clamping Capacity

  • Anodize Finish

  • Quick-Release, Spring-Loaded Locking Pins Keep Clamps Secured Safely to Table

$329.00 Delivered

Fits R745 

 5327861

 

 

 

Visit Ranger's Website for more Tire Machine Models to choose from!

 

 


 

Heavy-Duty Truck, Bus & Commercial Van 

Super-Duty Tire Changer

 

Ranger R26FLT Machine

R26FLT-Tire-Changer.jpg (16715 bytes) Click to Enlarge Images

 

SALE! $6315.00 Delivered

  

 

 

Watch It In Action Below...

RANGER MODEL: R26FLT

 

The Ranger R26FLT is an incredibly fast and efficient large tire changer. Swap out tubeless truck, agricultural and off-road tires from 9" to 26" in just minutes. A portable remote control brings convenient precision to your finger tips and saves you precious time. 

We've thoroughly explored all aspects of truck wheel service to develop the quickest large tire changer possible, so high-volume tire shops can get the speed, capability and dependability that they demand.

  • Super-duty electric motor and hydraulic drive for superior torque and wheel holding power.

  • Self-centering hydraulic clamping chuck.

  • Heavy, tapered roller bearings, and a dual direction hydraulic motor provide smooth torque.

  • Quick positioning and locking mount / demount arm.

  • Hydraulic sled carriage for positioning, bead loosening, mounting, and demounting procedures.

 

Features:

  • Super-duty electric motor and hydraulic drive for superior torque and wheel holding power

  • Self-centering hydraulic clamping chuck

  • Heavy, tapered roller bearings and a dual direction hydraulic motor provide smooth torque

  • Quick positioning and locking mount / demount arm

  • Hydraulic sled carriage for positioning, bead loosening, mounting and demounting procedures

  • Single piece frame for superior rigidity

  • Hydraulically operated spreader jaws ensure secure clamping of virtually all rims and off-road style wheels

  • Massive chuck spindle handles the heaviest loads

  • Sturdy spindle, chuck and mount-demount head hydraulically rotates, raises, and lowers with simple operator controls

  • Very gentle on over-the-road tires and tubeless tires mounted on aluminum wheels

  • Simple design is easy to use

  • Tire lubrication comes standard

  • Funnel comes standard

  • Large bead tool comes standard

  • Small bead tool comes standard

  • Rotary valve O-rings comes standard

  • Fuses comes standard

  • Wheel clamp comes standard

  • Lever grease gun comes standard

  • Drive system type: electric / hydraulic

  • Standard voltage: 208 V – 230 V / 60 Hz / 1 Ph

  • Wheel clamping method: 4 clamps

  • Bead breaking system: armor-plated disc

  • Max rim diameter: 9" – 27" 

  • Max tire / wheel diameter: 63" 

  • Max tire / wheel width: 31-1/2" 

  • Shipping weight: 1,485 lbs. 

Specification are subject to change without notice. *Different voltages available upon request.


 

Ranger Wheel Balancers

 DST2420  Click to Enlarge Images

Ranger DST-2420 Spinner Balancer
Heavy-Duty Digital Wheel Balancer.   $1730.00 Delivered

 

Features

  • Dynamic, Static, Motorcycle-ATV, and Performance Alloy settings

  • A multi-user save function holds presets to increase productivity

  • An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times

  • A simultaneous retrieval of static, dynamic and ALU1\ALU2\ALU3 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button

  • Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors

  • Low RPM balancing speed and rapid six-second cycle time

  • Automatic braking

  • Gram/ounce selection and millimeter/inch selection

  • Automatic round-off with top-dead-center weight position indicator

  • Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques

  • Manual or automatic start when hood is lowered.

  • Self calibration function

  • High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools

  • Precision-machined, hardened-steel 36-mm shaft.

  • Quick-release hub nut for dramatically reduced set-up times

  • Side-position brake hold wheels at precisely 12-o’clock for proper weight placement.

  • Side cone storage pegs keeps accessories readily available

  •  New “open-side” hood design allows for a broader coverage of tire shapes and sizes

  • Motor: 1.5 hp / 110V/220V 50/60HZ 1Ph..

  • Working temperature: 27F to 82F

  • Drive system: belt drive

  • Cycle time: 6 - 9 seconds (avg.)

  • Balancing modes: dynamic / static / 3-alloy

  • Top positioning weight locator: standard

  • Inside & outside measuring: standard

  • Millimeter / inches selection: standard

  • Ounce / gram selection: standard

  • Wheel offset distance setting: manual

  • Self-calibration function: standard

  • Auto start when hood is lowered: standard

  • Wheel spin braking: automatic / electronic

  • Wheel holding manual brake pedal: standard

  • Centering cones included: 3 standard / 1 truck

  • Truck cone / spacer ring adapter set: included standard

  • Wheel calipers: standard

  • Rear cone mount spring: standard

  • No-mar rear cone mount pressure cup: standard

  • Quick-release & mount hub nut: standard

  • Maximum tire diameter: 47"

  • Max tire weight: 145 pounds 

  • Max. wheel diameter: 10" - 24" 

  • Wheel width capacity: 2" - 18" 

  • Balancing increments: 0.25 or 0.01 oz

  • Balancing speed: 180 rpm

  • Accuracy: +/- 1 gram

  • Resolution (round off mode): 0.01 ounce, 1.4°

  • Shipping weight: 398 lbs. 


Truck Cone Kit for DST-2420 Balancer

FITS 36MM SHAFT ONLY

$279.00 Delivered

  5150555 

 


 

      Click to Enlarge Images

RANGER DST64T WHEEL BALANCER
FEATURING AUTOMATIC WHEEL DATA ENTRY

$2570.00 Delivered 

  5140240

 

Drive-Check™ Technology

The DST64T's Drive-Check technology dramatically improves rotational measuring typically used to diagnose and repair ride disturbance complications. The highly precise DST64T performs a computer generated driving simulation then checks and measures the tire / wheel assembly for imbalance and possible run-out of the rim and tire. With the DST64T, virtually all possible complaints due to rotational imbalance are eliminated before the wheel is mounted on the vehicle. 

Automatic Wheel Data Entry
Our revolutionary Data-Wand™ and inner data set arm allows you to quickly and automatically enter all wheel parameter settings in less than three seconds; wheel diameter, wheel width, offset distance and targeted weight placement positioning for exact balancing every time. The parameter values are automatically entered into the wheel balancer by a single simultaneous maneuver of the extendible and storable Data-Wand and inner data set arm reducing set-up times and eliminating opportunities for human error. The Data-Wand also features a built-in tape weight holder that aids with tape weight placement and positioning at precise locations.

 


User-Friendly Controls
A soft-touch key pad and display panel features tire and wheel graphics to help simplify speed entry of wheel data and helps guide technicians through balancing procedures. Operator function keys are labeled with simple, easy-to-read icons helping operators identify and command all balancing functions. Bright LED weight placement indicators and an audible alarm identify exact weight positions as the wheel is gently rolled to exact top-dead-center. Tiered weight placement indicators help identify out-of-sight weight placement such as split-weight or hidden “behind-the-spoke” techniques.

Inner Wheel Target Lighting
The DST64T incorporates a brightly displayed light-emitting diode (LED) inner wheel target light that automatically illuminates the interior of the rim and helps identify the exact weight placement location. Auto-activates each time the wheel restraint pedal is depressed.

 

Standard Accessories and Mounting Cone Package
The DST64T tooling package not only includes our standard car and light truck cones, but a medium-duty truck cone as well. This well-equipped four-piece cone set includes the following sizes; [1.75”-2.75”], [2.75”-3.50”], [3.50”-4.25”] and [4.25” - 5.12”]. Other standard accessories include; wheel caliper, weight hammer, rear mounting spring, Quick-Nut, Quick-Nut bell adapter and a specialty calibration weight.

 

  • Highly precise 64-bit architecture and single‐chip technology. Precision DataWand™ and inner data set arm allows you to quickly and automatically enter all wheel parameter settings in less than three seconds.
  • Serpentine poly-V belt features a polyester-aramid fiber composite core to resist degradation of functional performance under extreme operating conditions. Poly-V belt mates perfectly with motor and spindle sheave for continuous tension and distribution.
  • (1) Dynamic, (2) static, (1) standard alloy and variable alloy setting that enables you to select the exact weight placement location you choose for the specific wheel being serviced. Easily configured with the simple push of a button for a variety of wheel styles and designs.
  • Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors.
  • Low RPM balancing speed and rapid six-second cycle time.
  • Automatic braking
  • Gram/ounce selection and millimeter/inch selection
  • An audible alarm and brightly displayed LED’s identify exact weight amounts and precise positioning for perfect balancing.
  • Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques.
  • Wheel restraint pedal secures wheels at precisely 12-o’clock for easier servicing and proper weight placement.
  • LED inner wheel target light automatically illuminates the interior of the rim and helps identify the exact weight placement location. Auto-activates each time the wheel restraint pedal is depressed.
  • Manual or automatic start when hood is lowered
  • Self calibration function
  • High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools.
  • Precision-machined, hardened-steel 36-mm shaft (ACME thread 30-degree 3-P).
  • Quick-release hub nut for dramatically reduced set-up times
  • Side cone storage pegs keeps mounting cones readily available
  • Open-sided hood design allows for a broader coverage of tire shapes and sizes
  • Motor: 1.5 HP, 208-230V, 50/60HZ 1Ph.
  • Working Temperature: 27F to 82F
  • Drive System: Serpentine Poly-V belt
  • Cycle time: 6-12 seconds (avg.) Depending on Wheel
  • Balancing Modes: 1 Dynamic / 2 Static / Multi-Variable Alloy
  • Top Positioning Weight Locator: Standard
  • Inside & Outside Measuring: Standard
  • Millimeter / Inches Selection: Standard
  • Ounce / Gram Selection: Standard
  • Hidden Weight Function: Standard
  • Match Mount Function: Standard
  • Wheel Offset Distance Data Entry: Automatic
  • Wheel Diameter Data Entry: Automatic
  • Wheel Width Data Entry: Automatic
  • Self-Calibration Function: Standard
  • Auto Start When Hood is Lowered: Auto Start or Manual Start
  • Wheel Spin Braking: Automatic / Pulse Electronic
  • Wheel Restraint Pedal: Standard
  • Centering Cones Included: 3 Auto & Light Truck / 1 Medium Truck
  • Wheel Calipers: Standard
  • Rear Cone Mount Spring: Standard
  • No-Mar Rear Cone Mount Pressure Cup: Standard
  • Quick-Release & Mount Hub Nut: Standard
  • Maximum Tire Diameter: 50"
  • Max Tire Weight: 150 pounds
  • Max. Wheel Diameter: 10” - 30" 
  • Wheel Width Capacity: 1.5" - 20" 
  • Balancing Increments: 0.25 or 0.01 ounce
  • Balancing Speed: 180 RPM
  • Accuracy: +- .5 Gram / .025 Oz.
  • Resolution: (Round Off Mode) 5 Gram / .25 Oz.
  • Shipping Weight: 498 pounds
  • Unit Dimensions: / Width – Depth - Height [46”] [31” ] [56”]
  • Space Required: / Width – Depth - Height [60”] [50” ] [60”]

 

 

 

 


 

Now, For The Heavy Duty Stuff!

RANGER RB24T TRUCK WHEEL BALANCER

 

Ranger™ Model: RB24T

 

Handles them all... "Although best suited for bus, truck and OTR wheels, it’s capable and fully equipped to accommodate automobile and light truck wheels as well."

Description: Super Duty Truck Wheel Balancer with Drive-Check™ Technology.


The Ranger RB24T truck wheel balancer is a heavyweight wheel balancer suited especially for high-volume commercial tire dealers and truck fleets. It handles tires up to 52 inches in diameter and 20 inches wide and rim sizes up to 30 inches in diameter. 

Ranger RB24T

 

$6845.00 Delivered

  

 

Featuring Ranger’s proprietary Drive Check™ technology, it’s a powerful, vibration detection balancing solution that simulates road and driving speed conditions and measures computer generated imbalance of the tire and wheel assembly automatically. It then recommends the most cost effective weight optimization correction, as needed which minimizes weight usage and maximizes productivity.

An integrated wheel lift easily lifts the heaviest wheel assemblies for effortless mounting on the balancer. A full menu of time saving features include dynamic, static, and performance alloy settings allowing you to balance large and small wheel configurations with minimal effort and speed.

Balancer has a standard 208-240V single phase power unit but uses a phase converter to push 380V 3 phase to the motor giving this machine a vastly superior acceleration when spinning heavy truck tires. 

Brightly displayed LED indicators mark the exact amount and location for wheel weight placement in mere seconds. Like all Ranger wheel balancers, the RB24T is commercial grade for perfectly balanced wheels day after day and around the clock.

 

RB24T Tool Kit

 

RB24T MOTOR AND CONTROLS

 


    Visit Your Shopping Cart


 

 

 

 

 

Brake Lathes 

 

RL8500 CLICK TO ENLARGE IMAGE

Ranger Model: RL-8500

Combination Brake Lathe Package 

with Bench and Standard Tooling

  • Motor drive unit: 115 – 230 VAC / 50 – 60 Hz / 1 Ph / 20 amp

  • Max rotor thickness: 2-1/2"

  • Max rotor diameter: 17" 

  • Brake drum diameter: 6" – 28" 

  • Max load with standard 1" arbor: 150 lbs. 

  • Max load with 1-7/8" truck arbor: 250 lbs. 

  • Spindle travel: 6-7/8" 

  • Spindle speed: 150 rpm – 200 rpm

SALE $5545.00 Delivered! 

  

Adjustable Cutting Tools  Rotor Cutting  Rotor Cutting In Action  Drum Cutting  Brake Lathe Tools Included

 RL-8500
Brake Lathe

The revolutionary RL-8500 Combination Disc / Drum Brake Lathe uses independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically-driven lathes. 

RL-8500 Brake Lathe Kit Description
The ruggedly built RL-8500 is capable of faster, more accurate and easier resurfacing than any other brake lathe in its class. Infinitely adjustable feed rates allow you to easily modify cut speeds with the simple turn of a dial. Now you can reduce or increase the cut time for best finish results, whether you’re speeding through an initial rough cut or a single pass micro-finish. This complete lathe package includes lathe, a sturdy bench and large tool storage backboards, so you can hang all adapters within close reach.

The revolutionary RL-8500 uses independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically driven lathes. The absence of gear driven mechanical drives and variable‐speed transmission devices reduces service and repair costs dramatically over the unit’s lifetime. Vibration and chatter from gears, bearings and mechanical drive parts are eliminated—the same kind of vibration that is usually transferred to the tool-tip to leave irregular cuts in the machined finish. 

The RL-8500 simply offers more—more features, more performance, more utility, more flexibility and more productivity than you’ve ever imagined. That’s what makes this one of the soundest investments for yourself and your business.

Heavy-duty bench comes standard
While others charge extra, we include this sturdy steel bench with large tool storage backboards so you can hang all your adapters with an arm’s reach. A durable multi-compartment toolbox provides storage for all adapters and accessories. Large chip "catch" funnel and chip bin keeps work area clean and safe.

Easily change from rotors to drums
A convenient quick-change tool-head design allows operators to quickly change the setup from drums to rotors and vice-versa. Up-front controls are designed for minimal operator movement. A handy tool tray is located near the front of the machine, so you can keep your favorite brake lathe tools nearby.

Fully equipped adapter package
Includes micro-dial twin tool cutter, boring bar, inside floating adapters, self-aligning spacer, outside floating adapter, centering cones, spacers, double-taper adapters, hub-less adapters, carbide cutting tools, 6-sided carbide cutting inserts, 1" arbor, arbor nut, back-load spring, spare bulb for lamp, illustrated instruction manual, wrenches, high-impact anti-vibration bands and plastic storage case.

A tradition of service
Superior quality, durability and precision, that’s what makes Ranger the growing choice of professionals worldwide. Whatever your brake service needs may be, you can rely on Ranger to deliver the right equipment for the job. As a preferred supplier of quality automotive service equipment, our goal is simple: give our customers the best quality and value while providing unparalleled service and support. Why does Ranger offer you so much more? Because we don’t just believe in developing superior products, we believe in creating solutions that make your job easier. 

Simple, durable, trouble-free
Ranger brake lathes are easy to operate and durable enough to withstand the every day abuses of a busy shop environment. A super-heavy, forged, hardened, cast iron body combined with precision ground components and massive "floating spindles" make this one of the toughest, most dependable and trouble-free machines you will ever own.

Safe and easy to use
Our sensible ergonomic design allows you to work quickly and efficiently. Simple up-front controls are designed for minimal operator movement. Large bench with tool storage boards provide ample space for adapters and accessories. 

A proven design that will perform year after year
Since its introduction nearly four decades ago, the design of our RL-8500 has been a favorite of brake technicians everywhere. It's simple, it's fast, it's very precise and it runs forever. It features our twin-cutter tool head with micrometer dials and quick drum-to-rotor changeover. The adjustable speed settings allow you to quickly rough cut rotors or slowly give them a fine, smooth cut. An infinitely adjustable spindle-feed gear box provides variable speed settings, providing finish cuts that meet or exceed factory specs. Our negative rake tooling yields one pass finish cuts every time and the standard 1" arbor provides you a multitude of tooling and adapter choices from either Ranger or other aftermarket suppliers.

Durable work lamp
Keeps your work area properly lighted, even in the darkest corners of your shop. Separate switch lets you turn on or off at your convenience.

Safety shield
Clear Plexiglas safety shield for user safety.

Let the chips fly
Large chip "catch" funnel and bin keeps work area clean and safe. 

Adjustable stop
Position the cross feed stop so the lathe stops automatically after the cut is made. 

Optional Truck Adapter Set 

Fits RL8500 and RL8500XLT  
The optional super-duty adapter package consists of an upgraded 1-7/8" arbor and a wide variety of adapters. This enormous multi-piece set allows you to expand the coverage to handle virtually any vehicle, all the way through 1-ton trucks. 

Optional Truck Adapter Package $1339.00 Shipping Fee Included 

(NOTE! If Purchasing with a New Brake Lathe Call 630-678-9010 for a Discounted Price of $1239.00 Free Shipping)

    Truck Adapter Package Fits RL8500 and RL8500XLT  

 

  • In contrast to mechanically-driven transmission and gear boxes, the RL-8500 uses precision electric DC servo motors designed to meet the demanding requirements of industrial motion control

  • Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones.

  • Works on all cars or trucks, both foreign and domestic, with hub-less drums, rotors (center hole sized 2-5/32" – 4") and composite rotors (center hole sized 4" – 6-1/4")

  • The RL-8500 is equipped with features that help increase your service capability, like precision twin cutter tools and a quick drum-to-rotor changeover

  • Infinitely variable spindle and cross feed speed settings allow for quick rough and precision finish cuts

  • Simple ergonomic controls are designed for minimal operator movement

  • Legendary control makes unit easy to learn and master.

  • The RL-8500 maintains accuracy year after year thanks to ruggedly constructed components, like a hardened, precision ground spindle that resists grooving and makes boots a thing of the past

  • Massive tapered spindle bearings offer superior weight support during rotation

  • Our exclusive "splash-lube" oil-feed system supplies a constant flow of oil to the bearings making sure they provide years of trouble-free service

  • Serpentine belts provide a faster, quieter operation, reducing chatter and vibration

  • An independent cross-feed motor eliminates the need for plastic or bronze shear gears which are expensive and time consuming to replace

  • A convenient top storage tray means your popular adapters and tools are kept within short reach

  • Separate motors on the drum and rotor feed help maximize the main motor's efficiency

  • Our deluxe standard adapter package includes a Quick-Change hub-less adapter system that makes mounting rotors and drums quick and easy

  • A variety of adapters let you machine all standard and composite rotors for foreign and domestic cars and light trucks

  • A 450-lb. cast iron body and a solid work bench reduces transient vibrations, ensuring a smooth uninterrupted surface finish with each pass

  • Easily change arbor speeds in seconds: choose 150 or 200 rpm depending on the job

  • Positive rake cutter tip angle provides for a 1-pass finish virtually every time, allowing you to complete your work faster than with inferior multi-pass lathes

 


RANGER RL-8500XLT Heavy Duty 

Combination Brake Lathe

 

RL-8500XLT Brake Lathe

 

The durably crafted RL-8500XLT brake lathe resurfaces brakes quicker and more precisely than any other lathing unit on the market today. Like the RL-8500, the RL-8500XLT features unlimited feed rate settings, allowing the user to modify resurfacing rates with an easy turn of the dial. Now you can decrease or amplify the cut duration for the perfect finish regardless of if you’re rushing through the first rough cut or performing a single-pass micro-finish. The RL-8500XLT brake lathe is the total package and comes with a strong bench plus ample tool storage backboards, so all your adapters are always nearby. 

Time-tested construction.
Since its introduction nearly four decades ago, the design of our RL-8500 series brake lathes has been a favorite of brake service professionals everywhere. It's simple, it's fast, it's very precise and it runs forever. Features include our twin-cutter tool head with micrometer dials and quick drum-to-rotor changeover, adjustable speed settings allow you for quicker rough cuts or slower smooth cuts and an infinitely adjustable spindle-feed gear box with a variety of speed settings. Plus, our negative rake tooling yields one pass finish cuts every time, and the standard 1" arbor provides you a multitude of tooling and adapter choices from either Ranger or other aftermarket suppliers. Finish-cuts by the RL-8500 and the RL-8500XLT will meet or exceed factory specs. 

Transmission free!
The absence of gear-driven mechanical drives and variable-speed transmission devices reduces service and repair costs dramatically over the unit's lifetime. By implementing DC servo motor controls for the cross feed and spindle feed drives, we’ve removed any need for cumbersome mechanical gear boxes and transmissions used in older brake lathes.

 

The new Heavy-Duty RL-8500XLT Combination Brake Lathe from Ranger features an extended capacity spindle and can turn a drum that’s up to 10-inches deep. The longer spindle and the relocated rear bushing provide the RL-8500XLT arbor with enough support to handle your heaviest drum rotors.

 

 

Ranger Model: RL-8500XLT

Combination Brake Lathe Package 

with Bench and Standard Tooling

  • Motor drive unit: 115–230 VAC / 60 Hz / 1 Ph / 20 amp

  • Max rotor thickness: 2-1/2"

  • Max rotor diameter: 17" 

  • Brake drum diameter: 6" – 28" 

  • Max load with standard 1" arbor: 150 lbs. 

  • Max load with 1-7/8" truck arbor: 250 lbs. 

  • Spindle travel: 9-7/8" 

  • Spindle speed: 150 rpm – 200 rpm

  • Cross feed speed: (∞) 0 - .010" per revolution 

  • Spindle feed speed:(∞) 0 - .020" per revolution 

  • Overall mounted height: 62" 

  • Spindle to floor (mounted): 39-1/2"

  • Required floor space (width): 53" 

  • Required floor space (depth): 36" 

  • Shipping weight including bench and tools: 720 lbs.

A complete brake lathe tooling package comes standard.
Micro-dial twin tool cutter, boring bar, inside floating adapters, self-aligning spacer, outside floating adapter, centering cones, spacers, double-taper adapters, hub-less adapters, carbide cutting tools, 6-sided carbide cutting inserts, 1" arbor, arbor nut, back load spring, spare bulb for lamp, illustrated instruction manual, wrenches, high-impact anti-vibration bands, storage case and more all come standard with the RL-8500XLT Brake Lathe from Ranger.

Heavy-duty bench included.
Other manufacturers might try to make you pay extra for a sturdy bench, but Ranger throws it in as a standard accessory. Plenty of storage on the backboard to keep your tooling close at hand, a durable multi-compartment toolbox for adapters and a large chip “catch” funnel plus chip bin to keep your workspace both clean and safe--all this comes included in your RL-8500XLT purchase.

Optional extended RL-8500XLT truck adapter set.
Our super-duty adapter package consists of an upgraded 1-7/8" arbor and a wide variety of adapters. This enormous set allows you to expand the coverage to handle virtually any vehicle, all the way through 1-ton trucks!

SALE $6080.00 Delivered! 

  

Features:

•Extended capacity spindle can be used on brake drums 10” deep 
•Rear bushing location provides extra support for the arbor
•Capable of truing even the heaviest drum rotors
•In contrast to mechanically-driven transmission and gear boxes, the RL-8500XLT uses precision electric DC servo motors designed to meet the demanding requirements of industrial motion control
•Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones
•Works on all cars or trucks, both foreign and domestic, with hub-less drums, rotors (center hole sized 2-5/32” – 4”) and composite rotors (center hole sized 4” – 6-1/4”)
•The RL-8500XLT is equipped with features that help increase your service capability, like precision twin cutter tools and a quick drum-to-rotor changeover
•Infinitely variable spindle and cross feed speed settings allow for quick rough and precision finish cuts
•Simple ergonomic controls are designed for minimal operator movement
•Legendary control makes unit easy to learn and master.
•The RL-8500XLT maintains accuracy year after year thanks to ruggedly constructed components, like a hardened, precision ground spindle that resists grooving and makes boots a thing of the past
•Massive tapered spindle bearings offer superior weight support during rotation
•Our exclusive "splash-lube" oil-feed system supplies a constant flow of oil to the bearings making sure they provide years of trouble-free service
•Serpentine belts provide a faster, quieter operation, reducing chatter and vibration
•An independent cross-feed motor eliminates the need for plastic or bronze shear gears which are expensive and time consuming to replace
•A convenient top storage tray means your popular adapters and tools are kept within short reach
•Separate motors on the drum and rotor feed help maximize the main motor's efficiency
•Our deluxe standard adapter package includes a Quick-Change hub-less adapter system that makes mounting rotors and drums quick and easy
•A variety of adapters let you machine all standard and composite rotors for foreign and domestic cars and light trucks
•A 450-lb. cast iron body and a solid work bench reduces transient vibrations, ensuring a smooth uninterrupted surface finish with each pass
•Easily change arbor speeds in seconds: choose 150 or 200 rpm, depending on the job 
•Positive rake cutter tip angle provides for a single-pass finish virtually every time, allowing you to complete your work faster than with inferior multi-pass lathes
•Optional truck adapter kit available above this ad.


 

Visit our Branick web page LINK

 

2230 Truck Tire Inflation Cage 2230

Branick 3 bar Truck Tire Inflation Cage

Handles tires up thru 11.00 - 22. (47" diameter)

Inside Dimensions
Length: 19.50"
Width: 21.75"
Height: 50.00"

Free Shipping wt. 100 lbs

$689.00 Delivered 

 

2130 Pass/Lite-Truck Tire Inflation Cage   2130

 Branick 3 bar Van / Light Truck Inflation Cage

Ideally suited for the "no pressure" type tires. (37" diameter)

Inside Dimensions
Length: 19.50"
Width: 21.75"
Height: 37.00"
Free Shipping wt. 100 lbs.

$689.00 Delivered 

 


 

2240 Four Bar Truck Tire Inflation Cage

Model 2240
4 Bar Truck Inflation Cage
Handles tires up thru 12.00 - 24. (50" diameter)

Inside Dimensions
Length: 27.75"
Width: 21.75"
Height: 50.00"

Free Shipping wt. 141 lbs

$800.00 Delivered 

 Call 630-678-9010

   

 

2250 Five Bar Truck Tire Inflation Cage

Model 2250
5 Bar Truck Inflation Cage
Handles tires up thru 12.00 - 24. (50" diameter)

Inside Dimensions
Length: 36.00"
Width: 21.75"
Height: 50.00"

Free Shipping wt. 167 lbs

$1140.00 Delivered 

 Call 630-678-9010


 

                      Model 2260

6 Bar Heavy Duty Inflation Cage

Tires up thru 14.00 - 24. (54" diameter).

Inside Dimensions
Length: 40.75"
Width: 29.50"
Height: 54.00"

Shipping wt. 267 lbs

$2559.00 Delivered 


 Call 630-678-9010

 

5040 

Model 5040 manual Tire Spreader For Passenger and Light Truck Tires

$839.00 Delivered 

 Call 630-678-9010


Branick Tire Cart
Model TC
Tire Cart
Maneuverable... even with a full load of tires!

Foot-operated lever adjusts arms to handle 12" rim diameter thru 35" outside diameter truck tires. Unique design lets you stack tires close together to get maximum use of storage space. Branick Tire Carts feature a gas spring that automatically closes the arms that grip the tires. All you have to do is push down on the pedal, slide the cart into the stack of tires, and release the pedal. 

Arms close to 24", and open to 35".

Shipping wt. 92 lbs


Sale Price $889.00 Delivered!

 Call 630-678-9010

 


 
Professional Duty Filter/Air/Water Separators and Regulators

Keep the air supply regulated and clean while removing water 

so your air operated equipment operates more efficiently.

SAMSON 1/2 inch NPT Inline Professional 

Air Filter Water Separator

 1/2 inch FNPT #978 $98.00 Delivered


3/4 inch FNPT # 982 $128.00 Delivered

 


SAMSON Inline Professional Air Regulator & Gauge 

  1/4 Inch #970 $85.00 Delivered

 


1/2 Inch #976 $98.00 Delivered


 3/4 inch # 980 $149.00 Delivered

Delivered!

 


 

RANGER PRODUCT WARRANTY

Ranger Spray Wash Cabinets are warranted for five years on cabinet enclosure; one years on all operating components to the original purchaser, to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for this period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously described.

Ranger Wheel Service Equipment is warranted for one year on all operating components to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously described.

Ranger Shop Equipment is warranted for one year to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously described.

Ranger Tool Storage and Benches are warranted for one year to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously described.

 

These warranties do not extend to...

•defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of

required maintenance;

•damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions

provided in the owner’s manual(s) and/or other accompanying instructions supplied;

•normal wear items or service normally required to maintain the product in a safe operating condition;

•any component damaged in shipment;

•other items not listed but may be considered general wear parts;

•damage caused by rain, excessive humidity, corrosive environments or other contaminants.

THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF A BENDPAK INC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

 

This warranty is exclusive and in lieu of all other warranties expressed or implied. BendPak makes no warranty on components and/or accessories furnished to BendPak by third parties. These are warranted only to the extent of the original manufacturers warranty to BendPak. Other items not listed but may be considered general wear parts. BendPak reserves the right to make design changes or add improvements to its product line without incurring any obligation to make such changes on product sold previously. Warranty adjustments within the above stated policies are based on the model and serial number of the equipment. This data must be furnished with all warranty claims.

 

 

 

 

If You Would Like Additional Information On Any Specific Product Or Service, 

Call  630-678-9010 between 9 AM & 3 PM (Central Time) weekdays 

and we will get your Quote or info to you ASAP!

Smitty's Equipment Sales & Service

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010

 


NOTE: If you pay by check instead of using a credit card 

or from our website, you can deduct 2.0% credit card

processing fee on any purchase on this website!

  

Call for Info 630-678-9010 first and let us know what you would like to do so we can begin processing your order, this will speed up delivery for you. Then Mail your check along with a note with your phone number, equipment you are ordering and your shipping address to the address below.

 

Make checks payable to:

 

Smitty's Equipment Sales

 

Mail to: 

 

Smitty's Equipment Sales

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010


 

 

Back To Top Of Page

 

All Logos, Names, Trademarks and illustrations throughout this site are the  property of their respective owners.  

All the rest Copyright © 2006 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated