Back To Home Page

FIND OUR WEBPAGE LINKS BELOW

 

Challenger Lifts

 

BendPak Lifts

 

Quality Lifts

 

Globe

In-Ground Lifts

 

Fore & Aft 

Truck & Bus

In-Ground Lifts

 

Rotary Lift Accessories

 

Portable Heavy Duty Truck Lift

 

Ranger Wheel Alignment System

 

Branick

Tire Cages, Tire Spreaders, Brake Bleeders & Strut Compressors

 

Vehicle Lift 

Height Adapters &

Replacement

Rubber Pads

 

Power Units

For Lifts &

Power Unit

Repair Parts

 

CHAMPION

Air Compressor

Repair Parts

 

Saylor-Beall

American Made

Air Compressors

 

Lincoln

Lube Equipment

 

Lincoln

Hose Reels

 

Samson

Lube Equipment

 

Samson 

Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Tire Racks, 

Parts Washers,

Storage Lockers, 

Work Benches,

Oily Rag Cans

 

Oil Filter Crushers

& Tank Monitors

 

OIL TANKS &

Tank Gauges

 

Exhaust Pipe Benders

BendPak

 

Waste Oil 

Drains

 

Brake Lathes,

Tire Machines, Wheel Balancers,

& Accessories

 

Work Lights,

Portable Under-Hood Work Light System & Fluorescent Lighting

 

 Air Conditioning Refrigerant &

Engine Coolant Servicing Equipment

 

FLOOR JACKS,

Engine Hoists,

Shop Presses,

Vehicle Dolly, Jack Stands &

Other Equipment

 

 

 

TERMS &

CONDITIONS

 

 

 Official PayPal Seal

 
 

  

Service Jacks, Transmission Jacks, Vehicle Dolly Systems,

Assorted Shop Equipment and Other Handy Items!

 

Vehicle Dolly Link Click here

 

Gray Jack Link  Click here

 

Shop Crane & Engine Hoists Link Click here

 

Power Train Lift Table Link Click here

 

   

NORCO Jacks Have A 

Manufacturers Limited  

Lifetime Warranty

CLICK LINK

 


 

Professional Duty Service Jack

2 Ton Capacity 

71202A 71202A  $429.00 Delivered

    

A heavy-duty professional quality floor jack designed for a variety of automotive shop uses including the day to day rigors of the tire changing industry.

 

FEATURES: 

  • Steel hydraulic block assembly includes dust seals to prevent oil contamination.
  • Long, removable two piece handle.
  • Safety by-pass system protects pressure cylinder.
  • Safety overload system prevents jack from being used beyond its rated capacity.
  • Heavy duty chassis for added strength and dependability.
  • Dual pump piston design raises the jack to maximum height in 10-1/2 pump strokes.

 

20 TON FLOOR JACK

 

 

 

72220 Heavy Duty Service Jack  

72220A $2549.00  Delivered

 

 

Jack weighs 650 pounds

 

 

 

 

 


72450 Transmission Jack

  72450A  $1269.00 Delivered

1/2 Ton Air/Hydraulic Telescopic Trans Jack

$1269.00 Delivered

 


 

72500D Transmission Jack  

72500E $1089.00 Delivered

1/2 Ton Telescopic Trans Jack

$1089.00 Delivered


 

72701A Transmission Jack  

72701A $1698.00 Delivered 

ONE TON Air/Hydraulic Truck Trans Jack

 FEATURES:
Air/hydraulic foot pump provides hands free operation and easy convenient lifting. 
Metered pump valve provides safe lowering of load. 
Fully adjustable universal saddle with adjustable arms to position the transmission. 
Heavy duty chain with convenient chain tensioner secures load to saddle. 
2” diameter, flash chromed, single stage ram provides added stability throughout the entire lift range. 
Wide base with four 3-7/8” diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering. 

OPTIONAL Equipment

72001.jpg (6842 bytes) 72001 Differential Adapter

$349.00 Delivered

 

 

72003 72003 Fuller, Eaton, RoadRanger Adapter

$395.00 Delivered

 


72050C 1/2 Ton Transmission Jack

  72050D $689.00 Delivered 

1/2 TON Transmission Jack 

 

FEATURES:
Fully adjustable universal saddle with adjustable corner brackets 

and safety chain. 
Safety by-pass system prevents damage to cylinder. 
Safety overload system prevents jack from being used beyond its 

rated capacity. 
Full 360 degree rotating pump handle operates in any position. 
Flash chromed ram inhibits rust from entering the hydraulic system. 
Four full-swivel ball bearing caster wheels for easy positioning. 
Wide chassis for efficient load distribution and stability. 

OPTIONAL Equipment

 72509.jpg (7553 bytes) 72509

Ford 5R55W, 4R70W, 4X4N, AXOD Metric Transmission 

Adapter Fits jack models 72050D, 72675, 72500E, 72550B, 

72450A, and 72475.  $359.00 Delivered


 72513.jpg (8661 bytes) 72513 Ford CD4E Transmission Adapter

 $359.00 Delivered  

For use on Ford CD4E transmissions.
CD4E Vehicle Applications:
1994–2002 Mazda 626 4-cylinder 
1994–1997 Mazda MX-6 4-cylinder 
1994–1997 Ford Probe 4-cylinder 
1995–2000 Ford Contour 
1995–2000 Mercury Mystique 
1995–2007 Ford Mondeo (up to Mondeo III 4 cylinder) 
1999–2002 Mercury Cougar 
2001–2007 Ford Escape 
2001–2006 Mazda Tribute 
2005–2007 Mercury Mariner 

 


20 TON Air/Hydro Low-Profile Mobil Bottle Jack 

With Height Extensions

72090 Portable Air Powered Hydro Bottle Jack with Extensions  

LOW-PROFILE 72090A $579.00 Delivered

 


STANDARD HEIGHT 72080A $598.00 Delivered

FEATURES:     Specifications LINK

Long handle with 36-1/2” reach helps in positioning jack under vehicles with low overhang.

May be stored in a vertical position.

Hand grip also works as a stand to store the jack in a vertical position.

Compact design fits easily between tandem wheels.

Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust.

Removable extension screw is used with the two 4” extension adapters (included) for added height when necessary.

Self-retracting ram eliminates manual lowering of the jack.

5 1/4” diameter high impact composite wheels make maneuverability easy.

Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity.

Convenient push button air valve connected to an in-line filter prohibits contaminates from entering the air/hydraulic system.

 


 

Perfect Jack To Have 

In Your Car Trunk!

Wouldn't you rather have one and 

not need one, than to need one 

and not have one...

 

82002B Scissors Jack  

82002C $89.00 Delivered 

 

1-1/2 Ton Scissors Jack, 13-1/4 inch lift

     

 

 


 

20 Ton Capacity
Pair of Truck Ramps

(10 Ton Each Ramp)

 

82020.jpg (96164 bytes)

 

 

82020
20 Ton Capacity
Pair of Wide Truck Ramps 
(10 Ton Each Ramp)
INTENDED USE:
Elevates front or rear of vehicle for access to frame and components. 

Particularly useful on vehicles with low profile or ground-effects.

FEATURES:

  • Handles tires with up to 16” tread widths.
  • Telescopic T-handle extends & lifts up to expose wheels, easy maneuverability around the shop.
  • T-handle retracts for easy storage.
  • Perforated holes in ramps provide traction for the tires.
  • Non-skid rubber base pads prevent slippage when vehicle ascends and descends ramps.



 

82019 NORCO

(82020 Shown Above)

20 Ton Capacity
Pair of Truck Ramps

(10 Ton Each Ramp)

NOTE: Model not shown has same
basic construction as model pictured above.

 

INTENDED USE:

Elevates front or rear of vehicle for access to frame and components. 

Particularly useful on vehicles with low profile or ground-effects.

 

FEATURES:

  • Handles tires with up to 10” tread widths.

  • Telescopic T-handle extends & lifts up to expose wheels, easy maneuverability around the shop.

  • T-handle retracts for easy storage.

  • Perforated holes in ramps provide traction for the tires.

  • Non-skid rubber base pads prevent slippage when vehicle ascends and descends ramps.

 

 

CALL 630-678-9010 

FOR A QUOTE

 

 

Air Lift Jacks

 

# 82925 2-1/2 Ton Capacity  

  $1549.00 Delivered  

 

 

# 82920 Low Profile 2-1/2 Ton 

Raises Most Vehicles From Side Or Either End  

$1549.00 Delivered 

 

 

 

 

 

# 82950 Five Ton Capacity  

 

 

# 82999 Ten Ton Capacity  

 

 

CALL 630-678-9010 

FOR A QUOTE

Clutch Handlers

72030 Clutch Handler

72030 Clutch Handler

 

 

 

 

 

72035 Under Hoist Clutch Handler

72035 Under Hoist Clutch Handler

 

Call for Quote 630-678-9010

 

 


 

WHEEL DOLLY "HIGH-LIFT" STYLE

 

1/2 Ton Capacity High Lift Wheel Dolly

 

82302B High-Lift Wheel Dolly

 

For the removal and installation of single, tandem and duplex tires and wheels which are 

mounted on trucks that are supported above ground level.

 

FEATURES:

 

Specifications LINK


Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern. 


7-1/2” of side to side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum. 


A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation. 


The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for 

constant hand pressure against the crank handle. 


A hydraulic jack tilts the lift arms to match the angle of the spindle. 


Safety chain provided to secure tires and wheels to the dolly. 


Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. 

 

The caster wheels include a locking mechanism which can prevent the dolly from moving. 

 

Call for Quote 630-678-9010

 


 

NORCO ENGINE HOIST

 

FOLDABLE for EASY STORAGE 

 

 

  FOLDED VIEW Made in USA

 

 

 

NORCO 78106A

2,500 Lbs. Capacity
Folding Engine Crane      $1889.00 Delivered 

Call to purchase 630-678-9010

 


 

 

 

 

For lifting heavy items including removal and installation 

of diesel engines and often their transmissions.

(78605A SHOWN)

NORCO 78605A

6,000 Lbs. Capacity
3 Ton Shop Crane with Electro/Hydraulic Pump

 

$5989.00 Delivered 

3 Ton Capacity Electric/Hydraulic Floor Crane

 

Call to purchase 630-678-9010

 

 

MODEL 78605A FEATURES:

  • Multiple boom and leg extensions provide maximum stability.

  • Boom swivels 10 degrees right or left if base cannot be centered under the load.

  • Floor lock secures crane from moving when in use.

  • Includes an Electric over Hydraulic pump requiring 115 VAC.

 


 

3 Ton Capacity Air/Hydraulic Floor Crane

 $5569.00 Delivered  

 

MODEL 78600B FEATURES:

  • Multiple boom and leg extensions provide maximum stability.

  • Boom swivels 10 degrees right or left if base cannot be centered under the load.

  • Floor lock secures crane from moving when in use.

  • Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.

 

 


 

 

RANGER RSC-2TF TWO TON SHOP CRANE

 

RANGER RSC-2TF-Shop-Crane   

$669.00 Delivered 

 

Designed for shops with limited space 
Folds for easy storage 
Heavy steel construction for maximum durability 
Boom is reinforced to increase strength and eliminate flex 
Includes 8-ton capacity ram 
Heavy-duty steel casters for easy positioning 
Front casters include a safety brake to prevent movement 
Telescoping boom provides 4 positions 
Includes heavy steel hook with safety latch 
Wide base for maximum stability 

The RSC-2TF 2-Ton Folding Shop Crane sports a 1" to 93" lifting range and features a 4-hole position boom, 

8-ton capacity long-ram, 6-wheel design for added mobility and a foldable body. Quick-release ring pins make setup 

and teardown a snap. Heavy steel construction ensures maximum durability and the 4-position boom is reinforced, 

so flex isn't an issue.

 

 


 

THREE STAGE TELESCOPIC

BOTTLE JACK

7 -  7 -  3  TON STAGE CAPACITY

Low profile design in order to work in tight areas, raise fork lifts or for machinery moving or other small clearance applications.

THREE STAGE CYLINDER  NORCO 76637

Sale $389.00 Delivered  

FEATURES:

. Three stage lifting ram.

. Two piece zinc plated handle.

. Prevent rust with "Parkerized" pump piston, ram and extension screw.

. No leak "Uni-weld" construction.

. 50% safety overload factor.

. State of the art design reduces repair time.

. Longer wear life due to internally machined oil passages, smooth bearing surfaces   and close tolerances.

. Lightweight forged base provides more steel only where strength is required.

. Cold headed extension screw and release valve eliminate parts and reduce the chances of breakage and excessive wear.

. Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.

 

20 TON CAPACITY BOTTLE JACK

  NORCO-76820

$189.00 Each

FEATURES:

. Two piece zinc plated handle.

. Prevent rust with "Parkerized" pump piston, ram and extension screw.

. No leak "Uni-weld" construction.

. 50% safety overload factor.

. State of the art design reduces repair time.

. Longer wear life due to internally machined oil passages, 

smooth bearing surfaces and close tolerances.

. Lightweight forged base provides more steel only where 

strength is required.

. Cold headed extension screw and release valve eliminate parts 

and reduce the chances of breakage and excessive wear.

. Safety oil by-pass system prevents the ram from being 

overextended and causing damage to the cylinder.

. Carrying handles for easy transport.

 

 

 

NORCO Jacks Have A 

Manufacturers Lifetime Warranty

Heavy Duty Professional Jack Stands

 3 Ton Capacity 

# 81004C

$100.00 Delivered

81004C

 

 

6 Ton Capacity 

# 81006D

$115.00 Delivered 

81006D


12 Ton Capacity # 81012

$215.00 Delivered 

 

  81012 Click to see features

FEATURES:

• Spring loaded pawl provides constant locking pressure against lifting column.

• Four legged base with foot pads for added strength and a more secure footing on asphalt.

• Positive lock handle cannot be disengaged until load is off the saddle column. 

       Lock handle can be used as a carrying handle.

 

Weight 89 pounds 

 

 

 

 


 

UNDER HOIST STANDS

1-1/2 TON CAPACITY
UNDER LIFT STAND
3/4 TON CAPACITY
UNDER LIFT STAND
 

Assists in stabilizing & supporting a vehicle that is raised by an in-ground or above-ground lift. Should be used in pairs. 

Weighs 48 Lbs

 

81035A

 

FEATURES:

An adjustment pin chained to the stand secures the support column at six different height positions.

Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.

1-1/4" diameter acme threaded screw has 6-1/2" of travel for fine adjustment.

5/8" thick rubber saddle pad.

 

 Model 81035A 

 

 

$189.00 Delivered

 

Designed to support vehicle components, not the vehicle. Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components. Weighs 39 Lbs.

 

81033A

 

FEATURES:

Lightweight, slender design makes handling easy, even in close quarters.

.Quick adjust spin handle with thrust bearing eliminates wear and provides ease of   turning under load.

Pedal may be locked in vertical position for storage or shipment.

1-1/4" diameter acme threaded screw has 26-1/4" of travel.

 Model 81033A 

 

$179.00 Delivered

 

 

12 Ton Capacity Hand Pump Operated Shop Press

 

78013A Click to enlarge image

NORCO 12 TON SHOP PRESS #78013A

$1169.00  Delivered

  

FEATURES:

"Parkerized" pump piston, ram & extension screw to inhibit rust from entering the hydraulic system.

Pair of bed plates included.

Shielded heavy duty ram return springs.

Power unit is bearing mounted for horizontal movement on head channel.

Zero distortion, heavy duty structural steel frame.

Optional equipment below can be used on model 78013AD press. 

 

Model 78000 arbor plates and model 78032 bearing puller below can be used on model 78013A press.


20 Ton Capacity Hand Pump Operated Shop Press

78022D 20 Ton Shop Press Click to enlarge image

NORCO 20 TON SHOP PRESS #78022D

INTENDED USE:
Straightening, bending & pressing.
Removing & installing gears, bearings & bushings

MODEL # 78022D FEATURES:


“Parkerized” pump piston, ram and extension screw to inhibit rust from entering the hydraulic system.

 
Pair of bed plates included.

 
Shielded heavy duty ram return springs.

 
Power unit is bearing mounted for horizontal movement on head channel.

 
Zero distortion, heavy duty structural steel frame. 

 

Optional equipment below can be used on model 78022D press. 


Call for Quote 630-678-9010

 

 


 

25 Ton Capacity Air/Hydro Operated Shop Press

 

78024 AIR/HYDRO OPERATED SHOP PRESS

 

NORCO 25 TON SHOP PRESS #78024

INTENDED USE:
Straightening, bending & pressing.
Removing & installing gears, bearings & bushings

 

MODEL # 78024 FEATURES:


NORCO model 910130 Air/Hydraulic pump provides hands free operation.

 
Pair of bed plates included.

 
Self-retracting ram can slide for horizontal movement on head channel.

 
Zero distortion, heavy duty structural steel frame.

 
Liquid filled gauge measures ram force and internal working pressure.

 

Optional equipment 78025 Bearing Puller Kit can be used on model 78024 press. 

 

 

Call for Quote 630-678-9010

 


 

 

50 Ton Capacity Hand Pump Operated Shop Press 

78055A 50 Ton Shop Press

 

NORCO 50 TON SHOP PRESS #78055A

INTENDED USE:
Heavy duty use in truck garages and industrial work shops.

 

MODEL # 78055A FEATURES:

 

Manually operated two speed pump provides quick ram travel to load. 


Safety overload system protects power unit. 


Hand operated winch raises and lowers press bed. 


Liquid filled gauge measures ram force in pounds and tons.

 
Self-retracting ram is bearing mounted for lateral movement on head channel.

 

Optional equipment 78056A Arbor Plates & 78060 50-Ton Accessory Kit. 

 

Call for Quote 630-678-9010

 


 

 

50 Ton Electro/Hydraulic-Pump Operated Shop Press
 

78058A Electric- Hydraulic Operated 50 Ton Press
Heavy duty use in truck garages and industrial work shops. 

Equipped with model 910052A 

electro/hydraulic foot pump and model 910036A 10’ hose

MODEL # 78058A FEATURES:

 

Equipped with high speed electro/hydraulic foot pedal controled pump. 


Safety overload system protects power unit.

 
Hand operated winch raises and lowers press bed. 


Liquid filled gauge measures ram force in pounds and tons. 


Self-retracting ram is bearing mounted for lateral movement on head channel. 

Optional equipment 78056A Arbor Plates & 78060 50-Ton Accessory Kit. 

Call for Quote 630-678-9010

 


 

 

SHOP PRESS OPTIONAL EQUIPMENT:


12 Ton Arbor Plates: Part # 78000

 78000 Arbor plates

A pair of 1” x 4” x 10” long steel plates with “V” cutout on one edge and circle cutout on the other. 

For 12, 20 and 25 ton capacity presses only. Weight: 20 lbs.

 

 


 

20-25 Ton Arbor Plates: Part # 78033

A pair of heavier steel plates with “V” cutout on one edge and circle cutout on the other. 

For 12, 20 and 25 ton capacity presses only.
Weight: 28 lbs.

 


 

50 Ton Arbor Plates: Part # 78056A  

78056A for 50 Ton Presses

A pair of 50 Ton steel plates for use with all 50 ton capacity presses. 
Weight: 108 lbs.

 

 


Accessory Kit for 50 Ton Capacity Shop Presses Part #78060

78060
INCLUDES:
A. MODEL 78056A - Arbor Plates 
B. MODEL 78059 - Threaded Adapter 
C. MODEL 78061 - Ram Cap 
D. MODEL 78062 - “V” Pushing Adapter 
E. MODEL 78063 - 1” Diameter Ram 
F. MODEL 78064 - 1-1/4” Diameter Ram 
G. MODEL 78066 - Bearing Puller
(Dimensions) 
Weight: 143.5 lbs. 

 

 



Bearing Puller Kit:  Part # 78025
Accessory Kit for 20 & 25 Ton Capacity Shop Presses

78025 Bearing Puller Kit

INCLUDES:
A. MODEL 78033 - Arbor Plates 
B. MODEL 78028 - “V” Pushing Adapter 
C. MODEL 78029 - 3/4” Diameter Ram 
D. MODEL 78031 - 1” Diameter Ram 
E. MODEL 78032 - Bearing Puller
(Dimensions) 
Weighs 40 pounds


 

 

Hydraulic Gauge w/ Fittings: Part # 78021 Four Inch Diameter gauge designed to work 

with Norco 12 & 20 ton presses.

 Weight: 2 lbs

78021

FEATURES:
4" diameter face. 
Glycerin liquid filled type. 
Dial indicates internal pressure (psi) & corresponding pounds of force at ram end. 
Accurate within +/- 2.5%. 
Standard 1/4" NPT fitting.

 


 

Air / Hydraulic Pump: Model # 910130 Used with NORCO Air/Hydro Shop Presses

10,000 P.S.I. Air Powered over Hydraulic, Foot Operated Pump without Gauge 

 

For automotive / truck, industrial & construction jobs. 

The added convenience of an air motor reduces pumping time

 and effort to activate single acting hydraulic cylinders.

910130 Air Operated Hydraulic Pump

FEATURES:
Designed to utilize exhaust air to help power the pump, requiring only 80 p.s.i. air pressure to 

develop 10,000 p.s.i. hydraulic pressure.

 
Air exhaust muffler for quieter operation.

 
Air and oil inlet filters for reduced risk of damage from contamination. 


Designed with durable light weight, corrosion resistant plastics.

 
Foot pedal provides hands free pumping and release of load.

 
Designed to be used with a single-acting cylinder. 


Internal pressure relief valve for overload protection. 


Equipped with a more durable aluminum reservoir.

 
Comes with two different size poppit valves that can be quickly and easily installed.

Poppit valves reduce the return flow of oil back to the pump’s reservoir providing a 

safer controlled lowering of load. 

 


NORCO Power Train Lift Table 

With 2,500 Pound Capacity

INTENDED USE:
This lift table handles power train components like engines and their transmissions, engines with transaxle assemblies, rear ends and large electric vehicle batteries. It will also serve as a work table where components can be lowered to a convenient work height for repairs.

72850    72850 

Model 72850  

FEATURES:

. An air/hydraulic foot pump includes a metered valve for safe lowering of the load.

. Five foot extension hose with quick disconnect fittings stores in the lift base. The foot pump can be removed from its holder and hydraulic hose quickly and easily extended using the extension hose. This provides hands free operation of the pump anywhere around the lift's perimeter.

. Scissors lift design provides easy 360 to any component.

. Two heavy duty ratchet tie-downs are included to safely secure the load on the lift table.

. Table top height from 31" to 80-1/2".

. Four 8" diameter swivel caster wheels for easy maneuverability. Front wheels can be locked in position for steering. Rear wheels can be locked to prevent the lift from rolling.

Weighs 665 Lbs.

$4100.00 Delivered! 

Larger Heavier Items Allow Approximately Two Weeks For Free Delivery

 


 

  


American Made! 


GRAY TRANSMISSION JACK

HTJ 1000  Model HTJ-1000
Hi-Rise Transmission Jack 1/2 Ton (1,000-lb) capacity

Model HTJ-1000 $1939.00 Delivered!


The #1 choice of the professional automotive transmission repair shops. The HTJ-1000 has proven to be a leader by contributing years of trouble-free service and unsurpassed quality. The unique two-stage design has been an asset to many technicians allowing them complete control of the jack during installation and removal of transmissions. Used exclusively by some of the largest transmission repair facilities, Gray's model HTJ-1000 will definitely become the most popular transmission jack used in your shop!

  • Unique design...Gray's two-stage air and hydraulic design combines the power, speed, precision and durability demanded by the professionals.
  • User friendly...first-stage foot pedal controls, ratcheting head brackets and fore/aft tilt provides precise adjustments.
  • Powerful...1,000-lb capacity
  • Reliable...a time proven hydraulic system insures years of trouble free service.
  • Exact control...of transmission with high degree of forward tilt of 50°, rear tilt of 20° and side tilt of 10° adjustments.
  • Smooth maneuverability...four high quality 4" diameter swiveling casters.
  • Rugged "Nylon Speed Strap" provided...quickly secures the load
  • Missouri and Illinois purchases local sales tax applies.  

OPTIONAL ADAPTERS FOR THE HTJ-1000

Model #90 Adapter
Use with HTJ/TJ-1000

$519.00 Delivered   

 


This set of 4 adapters are designed for the vehicles where the exhaust passes right next to the transmission pan prohibiting easy removal of this type of transmissions. The 90° adapters are designed to work in conjunction with Gray’s model HTJ-1000 and TJ-1000 transmission jacks. Simply slide the adapter on the existing head plate ratcheting brackets and stabilize the transmission under the lip of the transmission pan with ease.

 
  Model #45 Adapter
Use with HTJ/TJ-1000 

$498.00 Delivered 


This set of 4 ratcheting brackets stabilize the irregular-shaped transmission pans allowing one-person removal and installation. This adapters work in conjunction with Gray’s model HTJ-1000 and TJ-1000 automotive transmission jacks. Simply slide the adapter on the ratcheting bracket on the jack head and prevent any unnecessary blocking.

 
 All Purpose Kit Model 41 Adapter Kit (multipurpose)
Multi-Purpose, Use with HTJ/TJ-1000

$519.00 Delivered 

 
This multipurpose adapter kit enables the technician to remove transmission and transfer case as one unit and allows easy removal of front wheel drive transaxles.

 
 Northstar adapter Model 4T80E Adapter
Use with HTJ/TJ-1000

$349.00 Delivered


Designed to stabilize awkward transmissions with only one mechanic by connecting this adapter to the side of the transmission in the provided bolt hole pattern. 

Typically, used with the Northstar Transmissions.

  GRAY JACK WARRANTY LINK

 

 

 



Challenger HD Stands

CLM-AB-16

CLM-AB-16 Jack Stand

Short height mobile column automotive lift support stand for 16,000 lb. capacity lifts, adjusts from 21.5" to 31.5" 

 

Short height mobile column automotive lift support stand for 16,000 lb. capacity lifts, adjusts from 31.5" to 41.25" 

 

Short height mobile column automotive lift support stand for 16,000 lb. capacity lifts, adjusts from 51.25" to 78.75" 


 

CLM-AB-18 Jack Stand

Short height mobile column automotive lift support stand for 18,000 lb. capacity lifts, adjusts from 21.5" to 31.5" 

 

Short height mobile column automotive lift support stand for 18,000 lb. capacity lifts, adjusts from 31.5" to 41.25" 

 

Short height mobile column automotive lift support stand for 18,000 lb. capacity lifts, adjusts from 51.25" to 78.75"

 

Call for Quote 630-678-9010

 


 

 


Ranger Vehicle Dolly RCD-1V

5150408

This dolly system is a mobile vehicle stand that conveniently frees your work bay and your hands. A safer and cost efficient alternative to floor jacks, the RCD-1V vehicle dolly will increase productivity without breaking your budget. Its sturdy ball bearing swivel casters allow you to place a disassembled drive train, chassis or body anywhere in the shop while it awaits parts. Tires on or off, the RCD-1V easily adapts to most makes and models. Height and width adjustable.

  • Ideal for moving dismantled vehicles

  • Includes saddles for easy alignment

  • Use as single unit or in pairs


  • Lifting capacity: 1,500 lbs. 

  • Overall height: 12" 

  • Width adjust: 40" - 59" 

  • Caster size: 4-1/2" 

  • Dimensions: 52" x 24" x 14" 

  • Shipping weight: 90 lbs. 

  • Shipping dimensions: 49" x 9" x 5" 

One Dolly $219.00 Delivered 

 

 


 

Ranger Vehicle Dolly RCD-1TD

 

 

RCD-1TD SET of TWO 5150190

 

The RCD-1TD Low Profile Automobile Carts maneuver around the shop with ease on four 3-1/2" steel ball bearing casters. 

Each dolly can hold up to 1,000 lbs., so you know it can handle whatever you've got. Push cars, boats or just about 

any vehicle in all directions. 

Keep your garage organized so that it operates at optimum efficiency.

 

  • Sold in pairs
  • Perfect for moving disabled vehicles
  • Swivel casters allows operator to move vehicles in all directions
  • Deep wheel wells keep vehicles secure
  • 3-1/2" cast iron ball bearing casters
  • Sturdy welded steel construction

  • Capacity: 1,000 lbs.  (each)
  • Dimensions: 15-1/2" x 23-1/2" 
  • Shipping weight: 46 lbs. 
  • Shipping dimensions: 26" x 17" x 6" 

 

Set of Two $169.00 Delivered 

 


Order Any Item From Our Website Or By Phone, Call 630-678-9010

 Between 9AM and 3PM Mon thru Fri 


NORCO Limited Lifetime WARRANTY CLICK LINK
 

 

GRAY JACK LIFETIME WARRANTY
Gray warrants to the original purchaser that the Gray product meets Gray's standard specifications for the product at the

 time of purchase, and will be free from defects in materials and workmanship for the normal useful life of the product subject

 to the terms, conditions and exclusions herein.

VALUE ADDED PROTECTION
Gray products are warranted against excessive or abnormal wear and tear for a period of one (1) year from the date of 

purchase by the original purchaser. This limited warranty period stops at the end of the one year warranty period or upon

 the date Gray product is no longer owned by the original purchaser, which ever shall first occur and subject to the terms, 

conditions and exclusions herein.

TERMS AND CONDITIONS
The limited warranties are subject to the following terms, conditions and exclusions:

The warranties do not cover any product or part that has been subjected to conditions other than normal wear and tear. 

These conditions may include but not limited to, the following: abused, contaminated, corroded, modified, heated, damaged, 

neglected products or parts, or products or parts subjected to unforeseen natural disasters such as, but not limited to war, 

flood, tornado, hurricane, wind or hail storm damage or the like. In the event of any alteration, modification, abuse or misuse

 of this product or if this product is used for a purpose other than for which it was intended, or used in a manner inconsistent 

with any instructions regarding its use, the limited warranties shall be void.

The sole and exclusive remedy shall be the repair or replacement of the defective or excessively worn product or part, 

at Gray's option.  All transportation charges shall be paid by the purchaser. Warranty claims must be made in writing to 

Gray Manufacturing Company, Inc. at 3501 S. Leonard Road, St. Joseph, MO 64503, model number and 

serial number must be included. This exclusive remedy shall not be deemed to have failed of its essential purpose 

so long as Gray is willing and able to repair or replace the defective product or part in the manner prescribed herein. 

In no event shall Gray be liable for any direct, indirect, special, incidental or consequential damages of any kind, nature or 

description, whether based on warranty, contact, tort, negligence, strict liability, or other legal theory.

These warranties are exclusive, and no warranty of merchantability, fitness for a particular purpose, or other warranty of any kind 

(whether expressed, implied or statutory) is made by Gray. No agent, employee or representative of Gray Manufacturing Company, Inc. 

has authority to bind Gray to any affirmation or warranty concerning Gray products or parts except as stated herein.

 


Send Checks and Correspondence to our Home Office:

 

Smitty's Equipment Sales

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010

 

 

 

Back To Top Of Page

All Logos, Names, Trademarks and illustrations throughout this site are the  property of their respective owners.  

All the rest Copyright © 2012 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated